,

Conventional Smoke Detector (2-Wire)

₹1,500.00

MANXPOWER conventional smoke detector with photoelectric sensing and a 2-wire connection. Ceiling mounted, covers up to 60 m² at 4 m ceiling height, with dual LED status lights. For conventional fire alarm panels.

- +

A conventional smoke detector is a ceiling-mounted detector that senses smoke and signals a conventional fire alarm panel when it finds it. The MANXPOWER conventional smoke detector uses a photoelectric sensor, connects with two wires and covers up to 60 m² at a 4 m ceiling height. It suits offices, hotels, shops, warehouses and the common areas of residential buildings that have a fire alarm panel.

How does a conventional smoke detector work?

A photoelectric detector has a small sensing chamber with a light source inside. In clean air the light does not reach the sensor. When smoke enters the chamber, it scatters the light onto the sensor, and the detector sends an alarm signal to the panel. A green LED flashes in normal operation and a red LED lights up in alarm. After an alarm, once the smoke has cleared, the detector is reset by switching the power off and on (power-off reset).

Conventional means the detectors on a circuit, called a zone, share one pair of wires back to the panel. The panel shows which zone is in alarm, not which single detector. If you need an address for every detector, you need an addressable system. Read more in our conventional fire alarm systems range.

Conventional vs addressable vs standalone smoke detectors

TypeHow it connectsWhat the panel showsSuits
ConventionalDetectors share a 2-wire circuit to the panelThe zone in alarmSmall to medium buildings such as offices, shops, hotels and warehouses
AddressableDetectors sit on a loop and each has an addressThe exact detector in alarmLarge or complex buildings
StandaloneBattery powered unit with its own sounderNo panel, local alarm onlyA single room or small space

Smoke detector specifications

DetailSpecification
TypeConventional photoelectric smoke detector
Wiring2-wire
Operating voltageDC 12 to 32V
Static current15 to 30 μA
Alarm current20 to 30 mA
Sensitivity0.15 to 0.5 dB/m
CoverageUp to 60 m² at 4 m ceiling height
Operating temperature-10°C to +55°C
HumidityUp to 95% RH
IndicatorsGreen LED (normal), red LED (alarm)
ResetPower-off reset
MountingCeiling mounted, detector head on a base
BrandMANXPOWER

What is the coverage area of a smoke detector?

One MANXPOWER smoke detector covers up to 60 m² at a ceiling height of 4 m, according to our specification. Use that as a limit, not a target. Room shape, ceiling height and obstructions change the real spacing, so the number of detectors comes from your fire design.

Where to use a conventional smoke detector

  • Offices and commercial buildings
  • Hotels, guest rooms and common areas
  • Shops and showrooms
  • Warehouses and storage areas
  • Residential buildings with a fire alarm panel, such as corridors, lobbies and rooms

It is not meant for kitchens, boiler rooms or very steamy or dusty spaces. Use a heat detector there. For a single room with no fire alarm panel, see our standalone smoke detectors. If you want smoke and heat sensing in one head, see our multi sensor detector. 

Why choose a photoelectric detector?

Photoelectric detectors respond well to smouldering fires, the slow kind that give off smoke before flames. They also tend to cause fewer nuisance alarms from cooking fumes than ionisation detectors. No smoke detector is immune to dust, insects or steam, so keep it clean and mount it away from vents.

How to install a smoke detector

Keep the area clean and free of dust while you work. Choose a ceiling location, ideally at the centre of the room, away from air vents and fans. Check that your panel’s detector circuit voltage is inside DC 12 to 32V, since many conventional panels run at 24V. Fix the base firmly with the screws provided. Wire the base as shown in the wiring diagram supplied with the unit. Align the detector head and twist it onto the base to lock it in place. Test the unit to confirm the alarm works.

For upkeep, test the detector regularly. Many maintenance plans test monthly and clean every six months, so follow your fire consultant’s schedule. Use a smoke detector tester, not an open flame. Clean it with a soft, dry brush. Switch off the power before any maintenance. Check the LED indicators during inspections. If an LED stays faulty or performance looks inconsistent, contact authorised service personnel. Do not open the unit.

Safety note: no detector can guarantee protection on its own. Regular testing, maintenance and sound fire safety practices remain essential.

Smoke detector price in India

The MANXPOWER conventional smoke detector costs ₹1,500. Conventional photoelectric smoke detectors are commonly listed in India at about ₹540 to ₹1,300 (marketplace listings, November 2026), and branded models are often higher. Buy online, or message us on WhatsApp or call +91 11 4987 2937 for a bulk quote, Monday to Saturday, 10:30 AM to 5:00 PM.

About MANXPOWER

MANXPOWER is the brand of Manx Impex, an ISO 9001:2015 certified supplier of industrial and fire safety products based in New Delhi since 2015.

FAQs

What is a conventional smoke detector?
A conventional smoke detector is a smoke sensing device that connects to a conventional fire alarm panel on a shared circuit, called a zone. The panel shows which zone is in alarm. The MANXPOWER unit uses a photoelectric sensor and a 2-wire connection.
How does a photoelectric smoke detector work?
Smoke entering the sensing chamber scatters a light beam onto a sensor, which sends the alarm signal. A green LED flashes in normal operation and a red LED lights up in alarm.
Is this smoke detector wired or wireless?
It is wired, with a 2-wire connection, and ceiling mounted. For a battery-powered or WiFi option with no wiring, see our standalone smoke detectors.
What is the coverage area of a smoke detector?
Up to 60 m² at a 4 m ceiling height for the MANXPOWER unit. The final spacing and number of detectors come from your fire design.
Does the smoke detector come with a base?
Yes. The detector head twists onto a ceiling base, and the screws for fixing the base are provided.
Is it compatible with a 24V conventional fire alarm panel?
It is made for conventional fire alarm panels and runs on DC 12 to 32V, so a 24V detector circuit is inside its range. Check your panel manual and follow the wiring diagram supplied. We also supply the MANXPOWER conventional fire alarm panel.
How often should a smoke detector be tested and cleaned?
Many maintenance plans test monthly and clean every six months. Follow your fire consultant’s schedule and use a smoke detector tester, not an open flame. If an LED stays faulty or performance looks inconsistent, contact authorised service personnel.
What is the price of a smoke detector in India?
The MANXPOWER conventional smoke detector costs ₹1,500. Conventional photoelectric smoke detectors are commonly listed at about ₹540 to ₹1,300 in India (marketplace listings, November 2026).
Scroll to Top